Quick Guide

15
The communication connection is optional. The communication between REGO products allows
safe operation, smart control, and close monitoring.
Depending on the installation condition, the communication connection needs to be established
with backbone or daisy chain topology.
Backbone Topology
If an RV-C bus is pre-installed in the RV, please follow the backbone topology for the
communication connection.
Recommended Accessories
LP16 Plug (7-Pin) to Bare Wires Drop Cable Drop Plug
z
Different drop sockets are used on the RV-C bus by different RV manufacturers. Please select
the Drop Plug that matches the drop socket for the communication connection. If unsure about
the Drop Plug selection, please check with the RV manufacturer. This Quick Guide takes the
Mini-Clamp II plug (4-pin) as an example.
z
The length of the Drop Cable shall not exceed 19.6 feet, and the total length shall not exceed
98.4 feet.
z
Different Drop Plugs follow different pinouts. Please crimp the Drop Plug to the Drop Cable
following the correct pinout. If unsure about the Drop Plug pinout, please check with the
RV manufacturer. This Quick Guide takes the pinout of the Mini-Clamp II plug (4-Pin) as an
example.
Communication