Installation Guide

RENOGY Pole Mount System

The Renogy Pole Mount System is designed for off-grid applications, when mounting to a roof is

not ideal. It will support off-grid systems, and panels up to 100W. The system comes complete

with all fasteners to secure the system to the installation surface. This system makes the

installation of small solar systems easy, affordable and quick.

Key Features

 5052-H32 aluminum construction

 Stainless steel fasteners

 High-tensile strength

 Corrosion Free

 Withstands 50 psf (125 mph wind loads)

 Attractive brushed aluminum finish

 Infinitely adjustable between 15-65 degrees

 Precision hole positioning and alignment

 Easy, rapid assembly

 Well-illustrated instructions

 Wind resistance of 120mph

 1-year material warranty

Recommended tools to have before installation (Not Provided):

 Socket wrench

 Torque extension

 Box-Leveler

 Tape Measure

 18mm wrench or socket for larger hex nut

 13mm wrench or socket for smaller hex nut

The above tools and equipment are highly recommended to have available to assist with

installation but are in no way a comprehensive list of tools that can ease installation. Installers

feel free to substitute comparable equipment where appropriate.

Note: All Cap Head Bolts (G) must have a Washer (H) and Spring Washer (I) prior feeding

through a hole.