Full Product Manual

If the monitoring screen is used with a parallel battery bank, the
communication between paralleled batteries must be enabled.
Please connect the RS485 LINK Communication Ports of the
former batteries to the RS485 UP Communication Ports of the
latter ones using CAT5 (or above) Ethernet straight through cables
(not included). The monitoring screen should be connected to the
RS485 UP Communication Port of the first battery.
RJ45
Communication
Cable
Ethernet Straight
Trough Cable
Copper Cable
DO NOT string batteries in series. Doing so can cause
catastrophic failure.
DO NOT string batteries with different chemistries, brands,
models, rated capacities, or nominal voltages in parallel.
RS485 LINK
Communication Port
RS485 UP
Communication Port