Full Product Manual

Error Code
Battery Operation Status
04
Battery Over-Voltage Protection /
Battery Cell Over-Voltage Protection
05
Battery Under-Voltage Warning
06
Charge Over-Current Warning
07
Discharge Over-Current Warning
08
Battery High Temperature Protection
(Charge)
09
Battery Low Temperature Protection
(Charge)
The communication between paralleled batteries MUST be
enabled using CAT5 (or above) Ethernet straight through
cables before connecting the battery bank to the monitoring
screen to obtain the accurate battery bank information.
If the number of paralleled batteries increases after connecting
the battery bank to the monitoring screen, please long press
the Page Up Button and the Page Down Button on the
monitoring screen at the same time for 3 seconds to reset the
monitoring screen and refresh the battery bank information.
The monitoring screen is ONLY able to obtain the information
of battery bank with no more than 900Ah rated capacity.
Button Operation
After connecting the monitoring screen to the battery or the
battery bank, please long press the Power Button on the monitor-