Installation Guide

32
Recommended tools to have before installation:
The following tools and equipment are highly recommended to have available to assist with
installation but are in no way a comprehensive list of tools that can ease installation. Installers
feel free to substitute comparable equipment where appropriate.
Image
Component
Description
Torque
Wrench
Allows for tightening of fasteners to a
specified maximum torque. Prevents
overtightening and better control of joint
assembly.
6mm Hex Bit
w/ Socket
Drive
Bit to be used with torque wrench to
drive hex cap bolts within the system
assembly. Ensure drive side is sized
appropriately to your particular socket
wrench key (usually 3/8”).
Tape Measure
Used to accurately mark spacing of
pilot holes which locate the roof
attachments for the L-Feet.
Caulking Gun
Used to direct sealant into penetrations
to avoid leaking in the roof.