Full Product Manual

Mounting Recommendations

The controller can be mounted using the existing mounting holes or using the included

mounting brackets.

Mounting Recommendations

NEVER

install the controller in a sealed enclosure with flooded batteries. Gas can

accumulate and there is a risk of explosion.

1. Choose Mounting Location—place the controller on a vertical surface protected from

direct sunlight, high temperatures, and water. Make sure there is good ventilation.

2. Check for Clearance—verify that there is sufficient room to run wires, as well as clearance

above and below the controller for ventilation. The clearance should be at least 3 inches (75mm).

3. Mark Holes

4. Drill Holes

5. Secure the charge controller.

WARNING

3 inches

(75mm)

3 inches

(75mm)

warm air

cool air