Installation Guide

• Please be aware that parts of the product may still produce
voltage even a
tivation of the safety guard (fuse).
General safety instruction
11
!
!
!
• Do not lay the cables so that they are loose or heavily kinked.
• Firmly secure the cables.
• Do not pull on the cables.
2.4 Safety when operating the product
WARNING!
• If the product is used in facilities with open lead acid batteries,
the room must be well-ventilated. These batteries give off
explosive hydrogen gas that can be ignited by sparks on
electrical connections.
CAUTION!
• Do not operate the product
– In salty, wet, or damp environments
– In the vicinity of corrosive fumes
– In the vicinity of combustible materials
• Always disconnect the power supply when working on the
product.
– In areas where there is a danger of explosions
• Before activating, ensure
that the power supply line and plug
are dry.
• Do not disconnect any cables while the product is still in use.
NOTICE!
• Make sure the air inlets and outlets of the product are not
covered.
• Ensure good ventilation.
2.5 Safety precautions when handling batteries
WARNING!
• Batteries may contain aggressive and corrosive acids. Avoid
battery fluid coming into contact with your body. If your skin
does come into contact with battery fluid, thoroughly wash
that part of your body with water.
If you sustain any injuries from the acids, contact a doctor
immediately.