Installation Guide

Technical description
15
The battery charger can be adapted to different battery types via DIP switches.
When a TS-100 temperature sensor is connected, the charging converter
adjusts the charging voltage according to the measured temperature, see
chapter “Technical data” on page 24.
7.1 Connections and controls
NOTE
The individual values are found in chapter “Protective devices” on
page 27.
Item in
fig. ,
page 3
Description
2 Input terminals (+) of starter battery
3 Power Indicator light
1 Input terminals (–) of starter battery
7 Control cable (I1) for turning on the vehicle with on-board voltage
(D+ or terminal 15(ignition))
4 LED display
8 Power regulation (I2) to limit the charging current to 12.5 %
6 RJ11 terminal: Connection of a temperature sensor (accessory)
5
10
DIP switch, see chapter “Adjust charging converter” on page20
9 Output terminals (+) to the body battery
Output terminals (–) to the body battery
1