Use and Care Manual

To enter the programming interface simply press and hold the right arrow button. After entering

this feature press the Enter/Right button to switch between parameters. To change the

parameters, press the Up or Down button. To save the parameter press and hold the

Enter/Right button.

The charging parameter setting (Equalizing voltage, Boost voltage, Floating charging voltage,

over-discharge return voltage, Over-discharge voltage) are only available under the battery

“USER” mode. Press and hold the right arrow to enter the programming settings and continue

pressing the right arrow button until you see the desired voltage screen.

Battery charging parameters can also be programmed using the Renogy BT APP. Read the

corresponding user manuals for more information.

Programming Parameters

NOTE

Over-discharge voltage

Over-discharge

return voltage

Battery type System voltage Equalizing voltage

Float voltage

Boost voltage