Use and Care Manual

Optional Components

Optional components that require a separate purchase:

The BT-1 Bluetooth module is a great addition to any Renogy charge

controllers with a RS232 port and is used to pair charge controllers with the

Renogy BT App. After pairing is done you can monitor your system and

change parameters directly from you cell phone or tablet. No more

wondering how your system is performing, now you can see performance

in real time without the need of checking on the controller’s LCD.

Renogy BT-1 Bluetooth Module:

Additional Components

Additional components included in the package:

This sensor measures the temperature at the battery and uses this

data for very accurate temperature compensation.The sensor is

supplied with a 9.8ft cable length that connects to the charge

controller.Simply connect the cable and adhere the sensor on top

or the side of the battery to record ambient temperature around the

battery.

NOTE

Do Not use this sensor when charging lithium battery.

Remote Temperature Sensor:

These brackets can be used to mount the Rover charge

controller on any flat surface. The screws to mount the

brackets to the charge controller are included, screws to

mount charge controller to surface are not included.

Mounting Brackets

The DM-1 4G Module is capable of connecting to select Renogy charge

controllers through an RS232, and is used to pair charge controllers with

Renogy 4G monitoring app. This app allows you to conveniently monitor

your system and charge syeters parameters remotely from anywhere 4G

LTE network service is available.

Renogy DM-1 4G Data Module:

Mounting Oval:7.66 x 4.70mm (0.30 x 0.18in)