Specification Sheet

Included Components
Remote Temperature Sensor
Measures the temperature at the battery and uses this
data for very accurate temperature compensation
Controller Paralleling Cable
This communication cable is needed to parallel two or
more Rover 100A charge controller. Paralleling 100A
Rovers allows for higher wattage systems
ROVER MPPT 100A SOLAR CHARGE CONTROLLER
Introducing the new 100A Rover MPPT Charge Controller, the largest
Rover controller that Renogy has to offer. Capable of supporting up to
1300 watts on 12 volts, 2600 watts on 24 volts, 3900 watts on 36V and
5200 watts on 48V. This off-grid controller was designed for large-scale
projects, both mobile and stationary. For even more power, users can
utilize a unique feature limited to this Rover and connect two 100A
Rover controllers in parallel for a total of 200 amps! This smart charge
controller can also conveniently self-diagnose itself in the event of an
error and can be remotely controlled through the Renogy BT app using
the Renogy BT-1 Bluetooth Module. By pairing the Rover with the BT-1
and the Renogy BT app through Bluetooth, users can easily monitor
and adjust their solar system straight from their phones.
➢ Automatically detect 12V/24V/36V/48V DC system voltages
➢ Smart 4 Stage MPPT charging (Bulk, Boost, Float and
Equalization) and temperature compensation increases battery life
and improves system performance
➢ Deep cycle AGM, Sealed, Gel, and Flooded options
➢ Electronic Protections: Overcharging, Over-Discharging, Overload
and short circuit
➢ Customizable charging voltages, RS232 port to communicate with
BT-1 Bluetooth module