Installation guide

Installation Guide RN3000US Jan13
22
WARNING!
The Digiwatts unit weighs up to 27 kg. To avoid injury, be sure to use
proper lifting techniques and secure the help of someone to assist in the
unpacking and installation of the inverter.
Information
It is required that the inverter be mounted so that the rating label on the
side of the inverter is visible.
4.1 Choosing a Mounting Location
Consider the following guidelines, cautions, and warnings when choosing a
mounting location for the Digiwatts unit.
WARNING!
Danger to life due to fire or explosion. Do not install the inverter on
flammable construction materials, in areas where highly flammable
materials are stored or in potentially explosive areas!
CAUTION!
The Digiwatts unit weighs up to 27kg. Ensure that the mounting surface
sufficiently sturdy to hold the weight of the Digiwatts. Do not mount the
Digiwatts on plasterboard (sheet-rock) or thin wood paneling.
NOTICE!
This unit is designed for indoor or outdoor usage. But it is suggested
that the unit not be exposed to rain or water directly and use of a shelter
to protect the unit would be preferred. Do not expose this unit to the sun
directly. This may reduce the output power due to high temperature.
 Mount the inverter at proper height from ground level to ensure that
display and status LEDs are easy to read, at least 1000mm from ground.
 The inverter should be installed in a location that is inaccessible to