Installation guide

Installation Guide RN3000US Jan13
24
must be mounted with a clearance of at least 50cm at all points, but
100cm bottom side.
Figure 4-2 the outer dimensions of the Digiwatts unit
Information
You must ensure that there is sufficient clearance for the flow of the air
around the Digiwatts unit! In a normal operating environment with good
ventilation, 50 cm of clearance is sufficient. The National Electrical Code
may require increased working clearances.
4.3 Mounting Procedure
4.3.1 Mounting bracket
The Digiwatts unit is shipped with expansion screws suitable for use on concrete,
masonry, brick or solid walls. And with wooden screws suitable for use on
wooden wall. Make sure that the wall you choose to mount the Digiwatts unit on
is sturdy enough to support its weight (27 kg) over a long period of time and that