Installation guide

Installation Guide RN3000US Jan13
29
Table 4-2 Mounting Items
Item Descri
p
tion
1
Stud wall
2
Cross Bars
3
Bracket
4
M6 washer
5
M6 spring washe
r
6
MS machine screw
4.3.2 Mounting the Digiwatts Unit to the Bracket
Use the following procedure to mount the Digiwatts unit once wall bracket is
secured to the wall.
1) Carefully hook the slots on the rear of the Digiwatts case onto
corresponding vertical tabs of the wall bracket.
Figure 4-8 Mounting the Inverter to Bracket
WARNING!
The Digiwatts unit weighs up to 27 kg. To avoid injury, be sure to use
proper lifting techniques and secure the help of someone to assist in the
unpacking and installation of the inverter.
2) Secure the bottom tabs protruding from the bottom of the Digiwatts units to
the bracket using two M6 machine screws and a lock. (The lock is not in the
scope of delivery. The user should obtain a lock as necessary
for security. )