Installation guide

Installation Guide RN3000US Jan13
30
Figure 4-9 Affix Bottom Tabs of Digiwatts unit to Mounting Bracket
3) Inspect the Digiwatts unit from both sides to ensure that it sits centered on
the wall screws.
4) Carefully verify that the Digiwatts unit is mounted firmly in place.
5 Wiring the Digiwatts unit
This section provides step-by-step procedures and other information required
for wiring the Digiwatts unit to the PV array and the utility grid. To complete the
installation in a safe and efficient manner, complete the steps in the order that
they appear.
WARNING!
Before connecting or operating the Digiwatts unit, read all of the
instructions, cautions, and warnings on the Digiwatts unit, the PV array
and in this Installation Guide.
WARNING!
You must connect the wires that carry the AC voltage from the Digiwatts
unit to the utility grid and the wires that carry the DC voltage from the PV
array to the Digiwatts unit in the order described in the procedures in this
M6 machine screw
Lock (optional)