Installation guide

Installation Guide RN3000US Jan13
36
Figure 5-3 AC Connection Terminals
5.4 Wiring the DC input
This subsection provides procedures for wiring the DC input from the PV array
to the Digiwatts unit.
5.4.1 DC Connection Requirements
WARNING!
All electrical installations must be done in accordance with all local
electrical codes and with the National Electrical Code (NEC),
ANSI/NFPA 70. For installation in Canada the installations must be
done in accordance with applicable Canadian standards.
WARNING!
Use #8 AWG-10AWG, 105 °C, copper wire for all DC wiring connections
Ground
L1
L2