Instructions / Assembly

RESO INC, 1930 Avenue L, Riviera Beach, 33404 FL www.reso-usa.com
PRE-HUNG DOOR INSTALLATION IN A FEW EASY STEPS (SINGLE DOOR)
STEP 1
Remove the plastic pin that holds doors closed
STEP 2
Using the level, check if the opening is straight
STEP 3
Double-check door swing. When the door opens to you and hinges on the left side, the hole for
the door knob on the right side is a Right-Hand door. When you see hinges on the right side of
the door and the hole for the knob on the left side, it is a Left-hand door
STEP 4
Lift the door to the opening bottom first, and you need to handle the door from the side where
you see the hinges, Check with the level side of the jamb with hinges is straight
STEP 5
Install shims to opposite hinges side and top of the door, check with the level if it is straight,
and make adjustments with shims
STEP 6
After you finish the adjustment, put two nails thru the jamb on each place where you installed
the shims
STEP 7
Countersink all nails, Paint, if desired, don’t sand the door and door jamb; it is 100% ready to
be Paint, and install the door knob
STEP 8
Enjoy every time when you open and close your new solid, heavy-duty interior door