Instructions / Assembly

RESO INC, 1930 Avenue L, Riviera Beach, 33404 FL www.reso-usa.com
PRE-HUNG DOOR INSTALLATION IN A FEW EASY STEPS (DOUBLE DOOR, FRENCH DOOR)
NOTE: THE DOUBLE DOOR (FRENCH DOOR) COMES PRE -HUNG BUT DISASSEMBLED BECAUSE OF
THE DOOR'S WEIGHT AND DIMENSIONS AND FOR A BETTER INSTALLATION EXPERIENCE. DOOR
SLABS DON'T HAVE PREDRILLED HOLES FOR THE KNOB. TOO MANY VARIATIONS ON HOW THIS
DOOR CAN BE USED PREVENT BAD EXPERIENCES, CUSTOMERS DECIDING HOW TO INSTALL KNOBS
ON THE SIDE.
STEP 1
Open the bag with screws, it attached to the door jamb
STEP 2
Combine the sides of the door jamb together using 1-inch black screws (phillips) from the bag.
Hinges on both sides of door jambs should be on one side. To install the top correctly stopper
on the door jamb and top should be in one line without offset
STEP 3
Unscrew hinges for the jamb of the door
STEP 4
Using the level, check if the opening is straight
STEP 5
Install the door jambs to the opening, nail two nails through the jamb, and shim to the opening.
Use for nails places routed for hinges
STEP 6
Attach the door slabs to the installed door jambs
STEP 7
Make necessary adjustments until the door close smoothly
STEP 8
The doors have installed catch ball. After you finish adjustment, you need to install on the top
of door jamb plates for catch balls, using plates and screws from the bag