SDS

D8040582 v 8.0

Conforms to USDOL OSHA 29CFR 1910.1200 HAZCOM

16. Other information

Notice to reader

To the best of our knowledge, the information contained herein is accurate. However, neither the above-named

supplier, nor any of its subsidiaries, assumes any liability whatsoever for the accuracy or completeness of the

information contained herein.

Final determination of suitability of any material is the sole responsibility of the user. All materials may present

unknown hazards and should be used with caution. Although certain hazards are described herein, we cannot

guarantee that these are the only hazards that exist.

Date of issue

Date of previous issue

Version

Indicates information that has changed from previously issued version.

2/5/2020

18/06/2018

interpreted and applied only by properly trained individuals to identify fire, health and reactivity hazards of

chemicals. The user is referred to certain limited number of chemicals with recommended classifications in NFPA

49 and NFPA 325, which would be used as a guideline only. Whether the chemicals are classified by NFPA or not,

anyone using the 704 systems to classify chemicals does so at their own risk.

Prepared by

Reckitt Benckiser LLC.

Product Safety Department

1 Philips Parkway

Montvale, New Jersey 07646-1810 USA.

FAX: 201-476-7770

RB is a member of the CSPA Product Care Product Stewardship Program.

Key to abbreviations

ATE = Acute Toxicity Estimate

BCF = Bioconcentration Factor

GHS = Globally Harmonized System of Classification and Labelling of Chemicals

IATA = International Air Transport Association

IBC = Intermediate Bulk Container

IMDG = International Maritime Dangerous Goods

LogPow = logarithm of the octanol/water partition coefficient

MARPOL = International Convention for the Prevention of Pollution From Ships, 1973

as modified by the Protocol of 1978. ("Marpol" = marine pollution)

UN = United Nations

13/13

2/5/2020

Date of issue

SDS #

8125757_D8040582

(NA)

Code #

D8040582 v 8.0