User guide

Direct Audio Input (DAI) - 61 and 71

Using the Direct Audio Input socket enables direct,

undisturbed connection to facilities such as: Television -

Radio - Remote microphone.

How to connect the Audio boot to the hearing instrument:

Pay close attention to the illustrations on how to connect

and disconnect the audio boot below

1. Make sure the tip of the audio boot is placed rstly in

the HAI (Hearing Instrument Accessories Interface).

2. Click the audio boot on to the hearing instrument.

3. The Audio boot is now connected.

How to disconnect the Audio boot:

Important: Do not disconnect the audio boot without push-

ing the release button rst.

4. Push the release button on the front side of the Audio

boot.

5. Gently remove the Audio boot.

The sound source is connected to your instrument with a

cable or a wire less FM system to the audio boot. The audio

boot will connect with a “click” to the hearing instrument

and switch to Direct Audio Input automatically.