Instructions / Assembly

A. Headboard (1 pc)

B. Footboard (1 pc)

E. Center Support (1 pc)

D. Wood Slat System (1 pc)

C. Siderail (2 pcs)

F. Outer Leg (4 pcs) G. Center Leg (2 pcs)

Platform Bed

Contains One (1) Bed and Hardware

IMPORTANT NOTE:

Carefully remove all the parts from the box. Arrange on a at

surface and verify you have all of the following parts and hardware.

PARTS LIST

HARDWARE LIST

ASSEMBLY INSTRUCTIONS

(Continued on back)

STEP 1

STEP 2

J. Hex Key (1 pc)I. Screw (9 pcs)H. Bolt (8 pcs)

Screw the outer legs (Part F) into the headboard

(Part A) and footboard (Part B).

Screw the bolts (Part H) half way into the

headboard and footboard.

TOOLS REQUIRED:

Phillips Screwdriver

SIZE: QN, DB

PAGE 1
Platform Bed Contains One (1) Bed and Hardware SIZE: QN, DB IMPORTANT NOTE: TOOLS REQUIRED: Carefully remove all the parts from the box. Arrange on a flat surface and verify you have all of the following parts and hardware. Phillips Screwdriver PARTS LIST A. Headboard (1 pc) C. Siderail (2 pcs) D. Wood Slat System (1 pc) E. Center Support (1 pc) B. Footboard (1 pc) F. Outer Leg (4 pcs) G. Center Leg (2 pcs) HARDWARE LIST H. Bolt (8 pcs) I. Screw (9 pcs) J.
PAGE 2
ASSEMBLY INSTRUCTIONS (CONTINUED) STEP 3 STEP 4 Screw the center legs (Part G) into the center support (Part E). Hang the siderails (Part C) from the bolts you screwed into the headboard and footboard in Step 2. Then tighten the bolts using the hex key (Part J). STEP 5 STEP 6 Insert the center support into the brackets on the headboard and footboard. Roll out the wood slat system (Part D) and secure it in place with 9 screws (Part I) using the pre-drilled holes.