Instructions / Assembly

A. Headboard (1 pc) B. Footboard (1 pc)

D. Center Support (1 pc)

E. Wood Slat System (1 pc)

C. Siderail (2 pcs)

F. Center Leg (3 pcs)

Platform Bed

Contains One (1) Bed and Hardware

IMPORTANT NOTE:

Carefully remove all the parts

from the box. Arrange on a at

surface and verify you have all

of the following parts and hardware.

PARTS LIST

HARDWARE LIST

(Continued on back)

K. Large Hex Key (1 pc)J. Small Hex Key (1 pc)H. Small Screw (2 pcs) I. Large Screw (9 pcs)G. Bolt (3 pcs)

TOOLS REQUIRED:

Phillips Screwdriver

SIZE: QN, DB

PAGE 1
Platform Bed Contains One (1) Bed and Hardware SIZE: QN, DB TOOLS REQUIRED: Phillips Screwdriver IMPORTANT NOTE: Carefully remove all the parts from the box. Arrange on a flat surface and verify you have all of the following parts and hardware. PARTS LIST A. Headboard (1 pc) D. Center Support (1 pc) B. Footboard (1 pc) E. Wood Slat System (1 pc) C. Siderail (2 pcs) F. Center Leg (3 pcs) HARDWARE LIST G. Bolt (3 pcs) A H. Small Screw (2 pcs) I. Large Screw (9 pcs) J. Small Hex Key (1 pc) K.
PAGE 2
ASSEMBLY INSTRUCTIONS STEP 2 STEP 1 J G K K Attach the Footboard (Part B) to the Side Rails (Part C) by sliding the Side Rail attachment over the pre-installed bolts on the Footboard. Attach the Headboard (Part A) to the Side Rails (Part C) by sliding the Side Rail attachment over the pre-installed bolts on the Headboard. Securely tighten the bolts on the Headboard and Footboard using Large Hex Key (Part K). STEP 3 Screw the Center Legs (Part F) into the Center Rail (Part D) using Bolts (Part G).