Instructions / Assembly

Customer Service: 800-626-1126 | rev-a-shelf.com
2
Measure scribe rail thickness
and length per your specic
cabinetry. (See Fig 1a and 1b)
Cut 4 totals rails (2 per side,
top and bottom).
Recommended Scribe rail
height: 3/4”
STEP 1
Install upper and lower scribe
rails to ller pullouts being
careful not to split the
wood. If using screws to
attach, be sure to pre-drill
rst. Align scribe rails with
front edge of ller pullouts.
Align scribe rail to top of
base cabinet lower mounting.
(See Fig 2)
NOTE
If installing pullout in a
frameless application, it is
recommended that a 1/16”
thick scribe rail be used to
space the ller unit properly.
STEP 2
FIG.
2
Top Scribe Rail is nailed to edge of
top section
Shipping Strap
Scribe Rail
(Shim)
DO NOT REMOVE FRONT SHIPPING STRAP PRIOR TO INSTALLATION!
Cabinet Wall
Scribe rail
measurements
Front of Cabinet
Scribe Rail
width dimension
(furniture offset)
Front of Cabinet
FIG.
1A
FIG.
1B
Scribe Rail
Length
#2
3
16
Bottom scribe rail is nailed to top edge
of bottom section