Instructions / Assembly

Customer Service: 800-626-1126 | rev-a-shelf.com
4
Note: Your pullout unit does
not need to be removed for
installation. If you encounter
an issue that requires the unit
to be removed, the release
levers for the Blum Tandem
slides are located as shown.
(See Fig 6a-b).
To release the Blum Tandem
Slides, squeeze the release
triggers and hold while
pulling ller away from
cabinet run.
STEP 1
Press up on adjustment tab.
Push toward back of unit.
Maximum 1/8” rise of ller.
(See Fig 7a-c)
STEP 1
12400 Earl Jones Way
Louisville, KY 40299
rev-a-shelf.com
Customer Service: 800-626-1126
FIG.
6B
FIG.
7a
FIG.
7b
FIG.
7c
Back of pullout
Top slide
release lever
Disassembling the pullout from the chassis
Front slide height adjustment
Bottom slide
release lever
1
2
Adjustable Ta
b