Instructions / Assembly

ManualsBrandsRev-A-Shelf ManualsKitchen21.25 in. H x 22.31 in. W x 21.62 in. D Pilaster System Kit for Door-Drawer Application

INSTALLATION INSTRUCTIONS: PILASTER DRAWER BOX SYSTEM

12400 Earl Jones Way

Louisville, KY 40299

rev-a-shelf.com

Customer Service: 800-626-1126

4PIL SERIES PILASTER DRAWER BOX SYSTEM INSTRUCTIONS

TOOLS REQUIRED:

45 MIN

ESTIMATED ASSEMBLY TIME:

CARE AND MAINTENANCE:

Clean with a damp cloth and

wipe parts dry.

I-4PIL-TRI-1116

VIDEO INSTRUCTIONS: WWW.REV-A-SHELF.COM/VIDEOS

Parts List

No. Description Qty

1 Pilaster Uprights (front of cabinet) 2

2 Pilaster Uprights (back of cabinet) 2

3 #8 x 3/4” Deep Thread Screws

(Screw Pack #059)

4 #6 x 1/2” Wood Screws

(Screw Pack #084)

5 Upright Safety Cap 4

6 Slide button/screw set 2/set

7 BLUM

Slides 2/set

8 Wood Box (Short) 1 or 2

9 Wood Box (Tall) 1

10 BLUM

Triggers 2/set

11 Wood Pegs (Tall Box Only) 5

12 Wire Dividers 5

3 4 5 6

10 11 12

7 8 9

Summary of content (4 pages)

PAGE 1
2400 Earl Jones Way Louisville, KY 40299 rev-a-shelf.com Customer Service: 800-626-1126 VIDEO INSTRUCTIONS: WWW.REV-A-SHELF.COM/VIDEOS 4PIL SERIES PILASTER DRAWER BOX SYSTEM INSTRUCTIONS TOOLS REQUIRED: #2 #2 No. ESTIMATED ASSEMBLY TIME: 45 MIN CARE AND MAINTENANCE: Clean with a damp cloth and wipe parts dry.
PAGE 2
DETERMINE YOUR APPLICATION FIGURE 1.1 STEP 1 The Pilaster Drawer Box system can be used for base cabinet and tall pantry applications. If your application is for a base cabinet, go on to step 2. If your application is for tall pantry application, please ensure you have enough vertical space in your pantry before continuing (See Fig 1.1). Remove the two top screws from the lower set of Pilaster Uprights (See Fig 1.2).
PAGE 3
INSTALLING THE PILASTER UPRIGHTS FIGURE 3.1 FIGURE 3.2 STEP 3 Refer to the included template to attach your PIlaster Upright Kit (See Fig 3.1). Before attaching the L-bracket to the wall with the provided #8x3/4” phillips truss head deep thread screws, ensure the machine screws that attach the Pilaster Uprights to the bracket are loose (See Fig 3.2). L-BRACKET ENSURE ALL SCREWS ARE LOOSE L-BRACKET #2 ATTACHING BUTTONS TO THE SLIDES STEP 4 Each slide set is to be fitted with 1 Pilaster Button Kit.
PAGE 4
HANGING SLIDES ON UPRIGHTS FIGURE 5 STEP 5 Locate the desired hole locations for the Pilaster Buttons to be inserted. ROTATE FRONT OF THE SLIDE SO IT FITS INTO THE FRONT PILASTER UPRIGHT Insert the button attached to the rear of the slide into the back Pilaster Upright slot. Drop the front slide button into the center of the front upright slot and press down to secure the slide (See Fig 5).