Instructions / Assembly

Customer Service: 800-626-1126 | rev-a-shelf.com
2
The Pilaster Drawer Box
system can be used for
base cabinet and tall pantry
applications. If your application
is for a base cabinet, go on to
step 2. If your application is for
tall pantry application, please
ensure you have enough
vertical space in your pantry
before continuing (See Fig 1.1).
Remove the two top screws
from the lower set of Pilaster
Uprights (See Fig 1.2). Stack
the new Pilaster Upright on
top of the bottom one and
attach the uprights using the
previously removed screws.
Remove the screws that attach
the four extension brackets to
the top of any Pilaster Uprights
that aren’t currently being used
as extensions (See Fig 2.1).
Place end caps on the top of
the front two Pilaster Uprights
(See Fig 2.2)
STEP 1
STEP 2
DETERMINE YOUR
APPLICATION
#2
#2
FIGURE 1.1 FIGURE 1.2
43.5”
LOWER UPRIGHT
REMOVE SCREWS,
INSERT THE UPPER
UPRIGHT, AND
REATTACH SCREWS
UPPER UPRIGHT
REMOVE EXTENSION BRACKET
PRESS DOWN FIRMLY
FIGURE 2.1
FIGURE 2.2
REMOVE SCREWS