Installation Guide

ManualsBrandsRev-A-Shelf ManualsKitchen7 in. H x 11.375 in. W x 20 in. D Base Cabinet Pull-Out Chrome Wire Basket

1

For help call our Customer Service Specialist at 800-626-1126

Rev-A-Shelf

2409 Plantside Drive

Jeffersontown, KY 40299

www.rev-a-shelf.com

I-58-TRI

Step 3. Install front slides to cabinet floor

with provided screws

Step 1. Place entire unit into cabinet at

desired location. Make sure

adequate space is available

for door closing, etc.

Step 2. Slide drawer out half way to allow for

installation of rear screws into cabinet floor.

For help call our Customer Service Specialist at 800-626-1126

Rev-A-Shelf

2409 Plantside Drive

Jeffersontown, KY 40299

www.rev-a-shelf.com

I-58-TRI

Step 3. Install front slides to cabinet floor

with provided screws

Step 1. Place entire unit into cabinet at

desired location. Make sure

adequate space is available

for door closing, etc.

Step 2. Slide drawer out half way to allow for

installation of rear screws into cabinet floor.

Summary of content (2 pages)

PAGE 1
For help call our Customer Service Specialist at 800-626-1126 Rev-A-Shelf 2409 Plantside Drive Jeffersontown, KY 40299 www.rev-a-shelf.com Step 1. Place entire unit into cabinet at desired location. Make sure adequate space is available for door closing, etc. Step 2. Slide drawer out half way to allow for installation of rear screws into cabinet floor. Step 3.
PAGE 2
Rev-A-Shelf • 2409 Plantside Drive • Jeffersontown, KY 40299 Étape 1. Placer l’unité entière à l’intérieur Étape 2. Ouvrir le tiroir à mi-chemin afin d’installer du cabinet à l’endroit choisi. Vérifier les vis de derrière dans le plancher du cabinet. qu’il y a suffisamment de place pour Etapa 2. Abrir la gaveta a medio camino para instalar fermer la porte, etc. los tornillos de atrás en el suelo del gabinete. Etapa 1. Colocar la unidad completa al interior del gabinete al lugar escogido.