Instructions / Assembly

I-CVRI-0417

12400 Earl Jones Way

Louisville, KY 40299

rev-a-shelf.com

Customer Service: 800-626-1126

CVRI SERIES WITHOUT DRILL GUIDE

TOOLS REQUIRED:

10 MIN

ESTIMATED ASSEMBLY TIME:

CARE AND MAINTENANCE:

Clean with a damp cloth and

wipe parts dry.

1/2”

1. Using a 1/2” drill bit drill

a hole at least 7” deep

2. Insert valet rod

NOTE: BEFORE YOU INSERT

VALET ROD REMOVE EXCESS

SAWDUST

3/4” .75” OR THICKER BOARD RECOMMENDED

Note: It is highly recommended

to use Rev-A-Shelf’s drill bit and

guide for accurate installation,

see other side for details.

(CVRI-DG, Sold Seperately)

PAGE 1
2400 Earl Jones Way Louisville, KY 40299 rev-a-shelf.com Customer Service: 800-626-1126 CVRI SERIES WITHOUT DRILL GUIDE TOOLS REQUIRED: 1. Using a 1/2” drill bit drill a hole at least 7” deep 2. Insert valet rod 1/2” ESTIMATED ASSEMBLY TIME: 10 MIN Note: It is highly recommended to use Rev-A-Shelf’s drill bit and guide for accurate installation, see other side for details. (CVRI-DG, Sold Seperately) 3/4” (.
PAGE 2
12400 Earl Jones Way Louisville, KY 40299 rev-a-shelf.com Customer Service: 800-626-1126 CVRI SERIES WITH DRILL GUIDE TOOLS REQUIRED: 1. Clamp drill guide to desired location and tighten 2. Drill to at least 7” deep 1/2” ESTIMATED ASSEMBLY TIME: 5 MIN CARE AND MAINTENANCE: 3/4” (. 75”) o 3. Firmly press the valet rod into place r thick er boa NOTE : REM BEFORE OVE EXCE YOU INSE SS SA R WDU T VALET ROD ST rd reco mmen ded Clean with a damp cloth and wipe parts dry.