F328Be Loudspeaker Owner’s Manual
IMPORTANT SAFETY INSTRUCTIONS 1. Use only attachments/accessories specified by the manufacturer. 2. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 3. Refer all servicing to qualified service personnel.
UNPACKING THE F328Be Unpack the F328Be in the order of the illustrations below.
6th
• If the loudspeakers are to be placed on a wood, linoleum or tile floor, install the spikes with the round ends protruding from the cabinet. After determining the final locations for the speakers, you can place coins or use specific discs under the spikes to protect the floor surface from damage. NOTE: If you prefer to install the spikes with the pointed ends protruding from the cabinet, you must place coins or similar items under the spikes to avoid damaging the floor surface. 3.
on each room boundary. These are reflection points that require acoustic treatment materials. If acoustic treatment materials are not available, hanging a rug over the reflection points will help reduce sonic degradation in overly “live” rooms. Carpeting the floor area between the loudspeakers and the primary listening position and placing irregular surfaces such as bookcases at the first reflection points will also help minimize strong reflections.
To make single-wire connections: Preamp (one channel shown) 1. Connect one speaker cable to the desired set of F328Be input terminals. (The highfrequency – “HIGH” – input terminals are recommended.) Then connect the other end of that speaker cable to the desired power amplifier output channel. 2. Repeat step 1 to connect the second F328Be to the power amplifier’s remaining output channel.
Preamplifier Y-Adapter for Single Connector OUTPUT A OUTPUT B F328Be Connector Panel F328Be Connector Panel INPUT A INPUT B OUTPUT A OUTPUT B Two-Channel Amplifier Shorting Straps Removed Two-Channel Amplifier Shorting Straps Removed OUTPUT A OUTPUT B INPUT A INPUT B 1. Remove the shorting straps 2. Connect one speaker cable to the high-frequency set of F328Be input terminals. Then connect the other end of that speaker cable to the desired power amplifier output channel. 3.
Торговая марка: Revel Назначение товара: Пассивная акустическая система Изготовитель: Харман Интернешнл Индастриз Инкорпорейтед, США, 06901 Коннектикут, г.Стэмфорд, Атлантик Стрит 400, офис 1500 Страна происхождения: Китай Импортер в Россию: OOO “ХАРМАН РУС СиАйЭс“, Россия, 127018, г.Москва, ул. Двинцев, д.12, к 1 Гарантийный период: 1 год Информация о сервисных центрах: www.harman.com/ru Срок службы: 5 лет тел.
Revel F328Be 3-way Triple 8" Floorstanding Loudspeaker The Revel F328Be is the flagship floorstanding loudspeaker from our award-winning PerformaBe series. The F328Be includes a 1-inch (25mm) beryllium tweeter driven by massive 85mm dual ceramic magnets.
Revel F328Be 3-way Triple 8" Floorstanding Loudspeaker Highlights: • Flagship floorstander for the PerformaBe range • 1-inch Beryllium Dome Tweeter • 6th-generation Acoustic Lens Waveguide • Deep Ceramic Composite (DCC) Cone Midrange and Woofers • High-order Crossovers with Film Capacitors and Air Core Inductors • Magnetically Attached Grilles • 4 Premium high-gloss finishes available HARMAN International Industries, Incorporated 8500 Balboa Boulevard, Northridge, CA 91329 USA www.revelspeakers.
Revel F328Be 3-way Triple 8" Floorstanding Loudspeaker 11.772in 299.02mm 16.563in 420.69mm 42.317in 1074.86mm 16.012in 406.70mm 50.217in 1275.50mm 50.924in 1293.47mm 52.336in 1329.34mm 17.663in 448.64mm HARMAN International Industries, Incorporated 8500 Balboa Boulevard, Northridge, CA 91329 USA www.revelspeakers.com © 2020 HARMAN International Industries, Incorporated. All rights reserved.
