Owner's Manual
5
In-Wall Architectural Loudspeaker
Instruction Manual
2. Determine the correct speaker location and use the template included
with the speaker to mark the wall material.
3. Cut the drywall along the mark you made in Step 2 to create the
mounting opening.
4. Connect the speaker to the amplifier as explained in Connecting to the
Amplifier, on page 5.
5. Make sure all of the speaker clamps are retracted in their “ready-to-
mount” position at the tops of the mount towers, tucked within the
mounting opening's border.
C2 Speaker Clamps in
Ready-to-Mount
Position
6. Insert the speaker straight into the mounting opening. Tighten the
speaker clamp screws on the front of the speaker baffle. The speaker
clamps will automatically rotate into position and begin clamping the
speaker.
s7HENYOUNOTICERESISTANCEONTHESCREWSTHESPEAKERHASBEEN
clamped successfully.
IMPORTANT: Always use low-torque settings. NEVER
over-tighten the clamp screws.
Insert Speaker
Straight Into
Mounting Cut-Out
Tighten
Clamping
Screws
All Clamps
Inside
Mounting
Cut-Out