Model Number: RECLKSD-1 REVO AMERICA 700 FREEPORT PARKWAY SUITE 100 COPPELL TX 75019 U.S.A TEL: 1-866-625-REVO (7386) Alarm Clock Digital Video Recorder USER MANUAL VER.: 1.
Contents 1. SAFETY PRECAUTIONS .......................................................................................................... 1 2. FEATURES .................................................................................................................................. 2 3. PACKAGE CONTENT................................................................................................................ 3 4. ALARM CLOCK DVR............................................................................
1. SAFETY PRECAUTIONS CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN! CAUTION : TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT OPEN COVERS (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. It is advised to read the Safety Precaution Guide through carefully before operating the product, to prevent any possible danger. WARNING: This symbol is intended to alert the user to the presence of un-insulated “dangerous voltage”.
2. FEATURES z The DVR is built-in with H.264 video. It supports video recording and playback operation. z Video data are recorded directly on the SD card with FAT32 file system and AVI file format. Simple data backup method to a PC. z You can view the data straight from your PC, and playback those AVI files with popular media players. z Supports up to 32GB SD card.
3. PACKAGE CONTENT Check to make sure all of the items shown below are included. If something is missing, contact your dealer as soon as possible.
4. ALARM CLOCK DVR 4.1 About the Alarm Clock DVR This DVR is well hidden inside a table LED clock. Just plug it into the wall... point it in the direction you want to record and start recording all the video that you need. To watch and review what you have recorded, you remove the included SD card from the DVR, insert it into your computer. It's that easy. It is a simple operation and a high quality video surveillance product. 4.
Start the Device z After the Alarm Clock DVR has been connected to the power supply, please check the time displayed. You will have to manually set the correct time and alarm. z Time is displayed in PM; A “PM” indicator will appear on the display for PM time only and when PM is not displayed this indicates that the time is AM. z Alarm symbol ( ) appear on the display indicates that the alarm has been setup to activate at the preset time. Set the Clock z Slide the switch to the TIME (4) position.
5. OPERATION 5.1 Power On 1. To power-up, connect to a DC 12V power input connector. NOTE 1: Booting time (does not include SD card checking process) is about thirty seconds. NOTE 2: Booting time may be slightly longer if an image file error occurs, because the system will automatically try to fix this situation. NOTE 3: Implementing SD card checking process, the system will temporarily be busy and may result in delays or a short-term frozen operating time display . 2.
③ Video Status: :Manual Record :Schedule Continuous Record :Motion Detection Record :Continuous Record+Motion Detection Record ④ Camera status: Indicates camera connection. ⑤ REC format (resolution) :CIF resolution in NTSC system :D1 resolution in NTSC system ⑥ REC format (quality) :High quality :Medium quality :Low quality ⑦ SD Card Status: :SD Card has not been inserted or malfunctioning. :SD Card is functioning normally. :Disk full. :Overwrite prevention status. SD Card is proceeding file testing.
To continue recording, please follow the methods below to restart recording. Repress《REC》button. Manual Record Schedule Record Stop playback and the system will auto re-check the record schedule setup again. 3. System recording is determined according to the recording priority order (Record Priority: Manual/ Motion Detection/ Continuous). 4. Different recording modes may have different kinds of setups.
② Playback Speed :Speed x2 :Speed x4 :Speed x8 :Speed x16 :Speed x32 ③ Display Record Date and Time Press《STOP》button to stop playback function and to return to live status. (2) Search and Playback: Enter MENU and select item【SEARCH AND PLAY】. 【TIME SEARCH】 ① The user may press《Up》or《Down》button to move the cursor up or down and setup Year/ Date/ Time. After setup, press《Enter》button to enter next setup page.
setting page. NOTE 1:To avoid confusion of implementing daylight saving time after the end of the recording time, 【TIME SEARCH】date and time display shows only the date and time without implementing of daylight saving time. NOTE 2:Press《STOP》button to stop playback and the system will return to【SEARCH and PLAY】selection and enables the user to select the prefered input source.
5.6 SD Card Maintenance 1. The device supports only FAT32 file system; therefore it is unable to determine other file systems. 2. The system supports only partial SD card file system repair. The system is unable to detect any file system damage, therefore please format the SD card (enter【SD CARD OPTIONS】and select “FORMAT”). 5.7 How to Download the Updated Software 1. Use the SD card to update your system firmware. 2.
6. MENU SETUP 6.1 Main Menu MENU Content: Basic Menu Operations. Press《Up》or《Down》button, to select the item. Press《Enter》button, to enter the sub menu (>). Press《STOP》button to return to previous page. NOTE: All words underlined and bold indicates「Default Value」. 6.2 Search and Play Please refer to 【5.4 Playback Mode】. 6.
MENU Content: Basic Menu Operations. Press《Up》or《Down》button, to select the item. Press《STOP》button to return to monitoring mode or to previous page. Press《Left》or《Right》button to increase or decrease setup value. ① Date Format ② Date/ Time Adjustment ③ Daylight Saving :Y / M / D M / D / Y D / M / Y :Year Setup: 2000 - 2030 Month Setup: 01 - 12 Time Setup: 00 : 00 - 23 : 59 :Start Date and Time, End Date and Time.
Motion Detection Area Setup: Motion picture page is divided into (NTSC) 22x15 small detection blocks. ① Detection Area:One or more detection blocks forms a detection area. ② Cursor:Press《Up》 《Down》 《Left》 《Right》button to change the position of the cursor. ③ Setup Mode:Press《PLAY》button to edit detection block.
MENU Content: Basic Menu Operations. Press《Up》or《Down》button, to select the item. Press《STOP》button to return to previous page. Press《Left》or《Right》button to increase or decrease setup value. ① Video Size VIDEO SIZE NTSC 704x480 ② Frame rate VIDEO SIZE (NTSC): 1/5 1/3 1 352x240 FRAME RATE (fps) 2 3 5 10 15 20 30 ③ Image Quality: HIGH MEDIUM LOW Using high recording quality (More SD card storage capacity will be required). Using medium recording quality.
(1) Continue Record:Setup method similar to Manual Record. (2) Motion Detection Record: MENU Content: Basic Menu Operations. Press《Up》or《Down》button, to select the item. Press《STOP》button to return to previous page. Press《Left》or《Right》button to increase or decrease setup value. ① ~ ③ ④ Duration ⑤ Pre-Alarm REC :Setup method similar to Manual Record. :Recording duration triggered by Motion Detection. Setup to 5 ~ 60 SEC (increasing by every 5 SEC), Default 10 SEC (NOTE1).
(3) Schedule Setup: ① SCHEDULE SETUP ② MODE :Record ON / OFF setup (default setup is OFF). :Press《Up》or《Down》to select Press《Left》or《Right》to setup :Motion Detection Record :Continuous Record :Continuous Record and Motion Detection Record :N/A 6.6 SD Card Options MENU Content: Basic Menu Operations. Press《Up》or《Down》button, to select the item. Press《STOP》button to return to previous page. Press《Left》or《Right》button to increase or decrease setup value.
① DISK TOTAL ② DISK REMAIN ③ CARD FULL :SD card total capacity. :SD card remaining capacity. :LOOP (Continuous Record)/ STOP (Stop Record) Stop Record – SD card stops recording when the total capacity of the SD card is reached (Default). ④ MAX FILE SIZE ⑤ FORMAT ⑥ SD UNMOUNT ⑦ REMAIN TIME Continuous Record -- SD card continues recording and overwrites recording data from the beginning when the total capacity of the SD card is reached (NOTE 1 & NOTE 2).
Press《Left》or《Right》button to increase or decrease setup value. :Setup menu language. ① LANGUAGE ② COPY SETUP TO SD CARD :Backup all settings of the device to the SD card. :Download settings of the device from the SD card ③ DOWNLOAD SETUP (NOTE). FROM SD CARD :Use SD card to upgrade system software, please ④ UPGRADE refer to【5.7 How to Update the Downloaded Software】(NOTE). :Return all settings back to default value (NOTE).
7. TROUBLE SHOOTING Q1. Why does the device sometimes suddenly restart? A1. It is because abnormality has been detected by the SD card reader, the device will start a re-initiation control procedure. After rebooting the device will return to the latest status, such as return to manual or schedule recording. Q2. What about the SD card compatible test? A2.
8. SPECIFICATION STANDARD FUNCTION Signal System NTSC Image Sensor 1/3“ High Resolution Sensor Lens Pinhole Lens,F2.0 / f =3.7mm Video Compression H.264 AVI file format Max.