Operation Manual

GB-27

ENGLISH

Assembly

1. Insert the saddle post (19) into the frame.

2. Align one hole of the saddle post with one hole of

the frame.

3. Screw the locking screw (22) into the hole of the

saddle post and of the frame. Make sure that the

locking screw engages ﬁ rmly and is tightened ﬁ rmly.

The locking screw may not be inserted below the

saddle post.

4. Then fasten the saddle (17) with the saddle sliding

guide (18).

5. Now fasten the saddle sliding guide (18) with the

M10 locking screw (21) and a washer to the saddle

post (19). The saddle distance to the handlebar can

be inﬁ nitely adjusted to your body height.

WARNING

Assembly

STEP 1

STEP 2

1. Place the front foot (41) and the rear foot (58) on

the ﬂ oor as illustrated.

2. Assemble both feet using respectively two M8 screws

(56) to the main frame (26).

WARNING

REX_Trainer_BX200_12.indd GB-27REX_Trainer_BX200_12.indd GB-27 02.05.12 08:1002.05.12 08:10