Owner`s manual
Operator manual REX-***R(F)
LISTEM Corporation 5/90
Warnings for operating the equipment
In order to maintain this equipment in good condition for long time, please make sure
to operate as following [Important matters in using medical electronic equipment
(safety and risk prevention)].
Medical electronic equipment (Safety and protection) Check list
1. It is important that everyone working with X-radiation be properly trained and
take adequate steps to insure protection against injury
2. When you install the machine, be cautious in following situation:
⑴ Install the equipment in a dry area.
⑵ Install the equipment where it will not be exposed to atmospheric pressure,
temperatures, humidity, ventilation, sunlight, dust, salt content, sulfur.
⑶ Be cautious to keep the equipment steady and level. Avoid slopes,
earthquakes and shocks (during movement)
⑷ Do not install the equipment around chemical, drug or gas storage .
⑸ Be careful about electric frequency, voltage or numerical value.
⑹ Ground the wire properly.
3. Before using the equipment:
⑴ Make sure the connection of buttons and check polarity to check proper
and accurate operation of the equipment.
⑵ Make sure the ground wire is fully connected.
⑶ Make sure that all the wires are properly and completely connected.
⑷ You may make a wrong diagnosis or cause injury if equipment is operated
simultaneously.
⑸ Double check the exterior circuit which touches the patient directly.
4. When using the equipment:
⑴ Don’t over use the equipment during diagnose, treatment.
⑵ Check the patient and machine all the time. Use proper protective
equipment for safe to a patient and an operator.
⑶ If you find error on with the equipment or indisposition of patient, stop the
machine under safe condition.
⑷ You must be careful to protect the patient from injury by operating
equipment.