Owner`s manual
Operator manual REX-***R(F)
LISTEM Corporation 51/90
Tower part▣
Keeping Horizon Button : For fixing to 0① 。 to prevent the Table from inclining inversely
Button for Inclination and Inverse Inclination : For inclining the Table.②
Sliding Button : For moving the Board toward head and leg③
Lock Device o④ f Tower Part : For locking all directions or partially locking only back-and-forth
Mark for Division Picture⑤ -Taking : For taking X-ray, with dividing into 1, 2, and 4.
Control Screw of Collimator⑥ Iris : For controling right-and-left, back-and-forth direction
Fluoro Button⑦
Exposure Button⑧
Pressure Corn(?)⑨
Cassette Tray⑩
Led for Division Mark⑪
▣ FILM LOADING
14'*14'(35cm*35cm)size for full exposure①
(It is possible to insert this, after removing
the spot film device.)
11'*14'(28cm*35cm)size for full exposure②
(It is possible to insert this, after removing
the spot film
device.)
10'*12'(25cm*30cm)size ③
for full and two subdivisional exposure
8'*10'(20cm*25cm)s④ ize for four exposure
8'*10'(20cm*25cm)size ⑤
for full and two subdivisional exposure
(cassette transvers insert)
8'*10'(20cm*25cm)size ⑥
for full and two subdivisional exposure
(cassette longitudial insert)