Owner`s manual

Operator manual REX-***R(F)
LISTEM Corporation 54/90
10. Finish Taking X-ray
- After taking X-ray, relocate the Table position originally.
2) Fluoroscopy operating
1. Move a patient to the Table.
2. Explain the inspection process to the patient before taking X-ray, and check it slowly.
3. Move the Tower Part forward and then prepare for fluoroscopy by coming it down.
4. Insert the Cassette. (Select 1,2,4SPOT for division, when you insert Cassette)
(When you take X-ray separately with using SPOT, insert the pressure corn into the part
which need to pressure, and it should be separated manually.)
5. Select SOPT(1spot, 2spot, 4spot) for taking X-ray separately.
(When you select the SPOT, the LED is turned on.)
6. Begin to fluoroscopy, using the fluoroscopy button. When you press the button, the LED is
turned on, "inspecting".
7. Through the monitor, look at the part which you want to take X-ray.