Owner`s manual

Operator manual REX-***R(F)
LISTEM Corporation 56/90
12. Explain the suggestions about the breathing or movement to a patient, before taking X-ray.
13. Set the Exposure Factors(fluoroscopic tube voltage, fluoroscopic tube current, time) in advance
for taking X-ray with SPOT according to position.
14. After selecting the part which you want to take X-ray, press EXPOSURE S/W.
Taking X-ray is completed after 3 seconds, if you press the EXPOSURE switch.
(The LED on the button is turned off by irradiation completion while you operate the
EXPOSURE.)
You can hear the audible sounds which indicate "irradiating" during taking X-
ray, and the
sounds stop when the irradiation is completed. The part which is taken X-ray is displayed on
the monitor and it is disappeared when the irradiation is completed.
15. If you need to take X-ray additionally, repeat the process from 4 to 14 after inserting a film.
16. Completion to take X-ray
― After taking X-ray, relocate the Table originally.
― Expl`ain the details for following treatment to the patient.