Owner`s manual

Operator manual REX-***R(F)
LISTEM Corporation 57/90
3.9.3 6-Way Table : KOB-60
(1) Appearance Structure and Title
Table Board : It is possible to move in 6① -way.(back/forth, right/left)
Cassette Tray : After moving toward the part which you'll take X② -ray, insert this.
Foothold Switch for Ta③ ble UP: If you press the UP Foothold Switch, it moves upward.
Foothold Switch for Table DOWN : If you press the DOWN Foothold Switch, it moves ④
downward.
Foothold Switch for Table 4⑤ -Way : If you press the Foothold Switch in both ends, the board
moves.
Power Switch : To power for the Table.⑥
Control Sensor for Back/Forth Way : When the Table moves in Back/Forth Way, this ⑦
controls the both ends to be same width.
Control Sensor for Maximum Height : T⑧
his controls the Table not to go up more
maximum height.
Control Device for Oil Pressure : This controls the pressure of the Table by Oil.⑨
Device ⑩ for Power Supply : This supplies Power for the Table itself.
(2) Table Power ON
1) Operate the GENERATOR by powering for the system.
2) Prepare for Table operation by pressing its own Power Switch on the right-centered of the
Table.
(3) Normal Taking X-ray
1) Fit the wide X-ray Field into the Table Center.
2) Adjust the Table Center, pressing the Foothold Switch.
(Press the Table 4-Way Foothold Switch No. 5 in the both ends.)