Replacement Parts Guide
Form P-RG/RP/RBL, P/N 263984R2, Page 24
Model RPB Damper Linkage
and Rigging by AR option
(Refer to the wiring diagram
to identify applicable
motorized AR Option.)
Option AJ1 is left side
controls; Option AJ2 is right
side controls.
Illustrations here and top of
page 25 are for Model RPB units
manufactured beginning 4/2012..
See pages 25-26 for illustrations
of some previously used (some
prior to 2004 only) damper linkage
arrangements. Illustrations of some
arrangements are not available.
Components by Option AR__ for currently manufactured (2012) Model RPB units.
See linkage illustrations below. (For components of obsolete Option Codes, see "BL" chart, page 23.)
(Refer to wiring diagram for applicable motorized AR Option.)
Code
Description P/N 6 7 8 12 15 17 18 25
362 Hand Quadrant #14004728-001 103502 X
363 Manual Damper Control Bracket (replaces P/N 103488) 143182 X
364
2-Position Damper Motor, J/C M9208-BGC-3 (effective 01/2012)
Mounting Kit, P/N 209352; Shaft, P/N 123642
209351 X X X
Replacement Kit for other 2-position Damper Motors (P/N 66276, 97385, and 209351 labeled J/C M9206-BGB-2S) is Kit P/N 209423.
366 Modulating Damper Motor, #M9175A1051 (no end switch) 115681 X X X X
369
Damper Rod, 1/4 x 13 inches long
See current Damper
Linkage Arrangements
pages 24-25 or
previously used
(mostly prior to 2004)
on pages 25-26.
112554 X
Damper Rod, 1/4 x 13 inches long 11561 X X X X
370 Damper Rod, 1/4 x 18 inches long 11560 X X X-AJ2
371 Damper Rod, 1/4 x 17 inches long 112556 X X X-AJ1 X X
377 Damper Arm, M/H #20265 12635 X X X(2) X(2) X(3) X(2) X(2)
378 Ball and Socket, M/H #27518 12636 X(2) X(2) X(4) X(4) X(4) X(4) X(4)
380A Crank Arm M/H #221455A 116209 X X X X
380B Crank Arm Spacer 195639 X X X X
383 Damper Motor Support Assembly 100315 X X
384 Damper Arm Adjustment Plate 115687 X X X X X
386 Air Controller Support Bracket 103758 X
387 Potentiometer, M/H #112894FA 16110 X X
388 Mixed Air Controller, M/H #T991A-1004 16109 X X
389 Outdoor Air Controller, J/C#A19AAF-120 126170 X
391 Auxiliary End Switch only for M/H Damper Motors, #Q607B1067, P/N 113963
392 Auxiliary Switch Kit (2 switches), M/H 220736B, P/N 145881
393 DDC (4-20ma) interface module for use with modulating damper motor, Honeywell Q7230A, P/N 171134 X
Dampers and Controls (cont'd)
18" LONG
DAMPER ROD
P/N 11560
BALL JOINT
TO INSIDE
SET AT 40° -
P/N 12636
DAMPER MOTOR
#M9208-BG3-3
P/N 209351
DAMPER ARM
P/N 12635
SET ARM AT
1 O'CLOCK
BALL JOINT TO INSIDE
SET AT TIP - P/N 12636
MOUNTING KIT
P/N 209352
DAMPER ARM P/N 12635
SET ARM AT 1 O'CLOCK
Options AR7
and AR8 (AJ2)
18" LONG
DAMPER ROD
P/N 11560
BALL JOINT
TO INSIDE
SET AT 40° -
P/N 12636
DAMPER
MOTOR
#M9208-BG3-3
P/N 209351
DAMPER ARM P/N 12635
SET ARM AT 11 O'CLOCK
BALL JOINT TO INSIDE
SET AT TIP - P/N 12636
MOUNTING KIT
P/N 209352
DAMPER ARM P/N 12635
SET ARM AT 11 O'CLOCK
OUTSIDE AIR
CLOSED
OUTSIDE AIR
CLOSED
SET ON
MIDDLE
PIN OF 3
BLADE DAMPER
SHAFT
P/N 123642
SHAFT
P/N 123642
SET ON MIDDLE PIN
OF 3 BLADE DAMPER
Options AR7
and AR8 (AJ1)
DAMPER ARM
P/N 12635
SET ARM AT
11 O'CLOCK
BALL JOINT
TO OUTSIDE
SET AT 50° -
P/N 12636
BALL JOINT
TO OUTSIDE
P/N 12636
DAMPER ARM ADJUSTMENT
PLATE P/N 115687
SEE DETAIL A
MOTOR ARM P/N 12365
SET ARM AT 11 O'CLOCK
DAMPER ARM P/N 12635
SET ARM AT 1 O'CLOCK
13" LONG DAMPER ROD
EVEN WITH BALL JOINT
BOTH ENDS
P/N 112554
17" LONG
DAMPER ROD
P/N 112556
Option AR17 (AJ2)
DAMPER ARM
P/N 12635
SET ARM AT
11 O'CLOCK
BALL JOINT
TO OUTSIDE
SET AT 50° -
P/N 12636
BALL JOINT
TO OUTSIDE
P/N 12636
DAMPER ARM
ADJUSTMENT
PLATE P/N 115687
MOTOR ARM
P/N 12636
SET ARM AT
11 O'CLOCK
DAMPER ARM
P/N 12635
SET ARM AT
1 O'CLOCK
13" LONG DAMPER ROD
EVEN WITH BALL
JOINT BOTH ENDS
P/N 112554
18" LONG DAMPER ROD
P/N 11560
BALL JOINT TO INSIDE
SET AT 45° - P/N 12636
BALL JOINT TO INSIDE
P/N 12636
BALL JOINT
TO INSIDE
SET AT 45° -
P/N 12636
BALL JOINT
TO INSIDE
P/N 12636
DAMPER MOTOR
#M9208-BG3-3
P/N 209351
DAMPER
MOTOR
#M9208-BG3-3
P/N 209351
MOUNTING KIT
P/N 209352
MOUNTING KIT
P/N 209352
OUTSIDE AIR CLOSED
OUTSIDE AIR CLOSED
SET ON MIDDLE PIN
OF 3 BLADE DAMPER
SHAFT P/N 123642
SHAFT
P/N 123642
SET ON MIDDLE PIN
OF 3 BLADE DAMPER
DETAIL A
BOLT DAMPER ARM
ADJUSTMENT PLATE TO
MOTOR ARM USING -
BOLT P/N 10393 (2)
& NUT P/N 7328 (2)
Option AR17 (AJ1)