Replacement Parts Guide

ManualsBrandsReznor ManualsHVAC Replacement PartsFan Control Replacement Kit

Form P-RG/RP/RBL, P/N 263984R2, Page 38











































































































RBL; PGBL, (C)RGBL, RPBL 400, 800,

1200; & RPDBL 800, 1600 (2 sets)

RBL; PGBL, (C)RGBL, RPBL 400, 800,

1200; & RPDBL 800, 1600 (2 sets)

RBL; PGBL, (C)RGBL, RPBL 400, 800,

1200; & RPDBL 800, 1600 (2 sets)

A 16 x 16

B 16 x 25

C 12 x 25

D 12 x 30

PGBL, (C)RGBL, RPBL 500, 600;

RPDBL 1000, 1200 (2 sets)

PGBL, (C)RGBL, RPBL 500, 600;

RPDBL 1000, 1200 (2 sets)

PGBL, (C)RGBL, RPBL 500, 600;

RPDBL 1000, 1200 (2 sets)

PGBL, (C)RGBL, RPBL 700, 1050;

RPDBL 1400 (2 sets)

PGBL, (C)RGBL, RPBL 700, 1050;

RPDBL 1400 (2 sets)

PGBL, (C)RGBL, RPBL 700, 1050;

RPDBL 1400 (2 sets)

Filter Arrangements for 1" or 2" Disposable Filters (Options AW2 and AW7)

Filter Arrangements for 1" or 2" Disposable Pleated Filters (Options AW10 and AW11)

Filter Arrangements for 1" or 2" Permanent Filters (Options AW8 and AW9)

Blockoff Plates:

(1) P/N 106334;

(4) P/N 114337

Blockoff Plates:

(1) P/N 106332;

(4) P/N 114336

Blockoff Plates:

(1) P/N 106332;

(4) P/N 114336

Blockoff Plates:

(1) P/N 106334;

(4) P/N 114335

Blockoff Plates:

(1) P/N 106332;

(4) P/N 114337

Blockoff Plate:

(1) P/N 106333

Blockoff Plate:

(1) P/N 106334

Blockoff Plate:

(1) P/N 106334

Blockoff Plate:

(1) P/N 106332

Replacement Filters/Blockoff Plates for Model Series RGBL/RPBL and Blower Cabinet Model RBL

manufactured prior to 9/91

Filter

Code

Filter

Size

* 2"

Disposable

* 2"

Permanent

* 2"

Pleated

Unit Size and Quantity of Filters

Required

AW7 AW9 AW11 500 600 700/1050 400/800/1200

A 16 x 16 104101 104103 104109 -- -- -- 4

B 16 x 20 104097 101620 104110 4 4 -- 8

C 16 x 25 104099 101622 104112 4 4 8 --

Blockoff Plates

Code P/N "X"

1 106332 1-1/2" (38mm)

2 106333 2" (51mm)

3 106334 5/8" (16mm)































Filter Removal and Installation Instructions - Applies only to RGBL and RPBL Series manufactured prior to 9/91

Filter Removal

1. Remove screw (1) from the lter rack and

remove the retaining angle.

2. Rotate lter down and remove from unit. Slide

next lter over and rotate down and out. Repeat

for remaining lters in top row.

3. Remove screw (1) from lter rack and remove

retaining angle.

4. Rotate lter up and out of rack. Slide the next

lter over and rotate up and out. Repeat for

remaining lters in the row.

5-8. Repeat Steps 3 and 4.

9. See lter installation instruction label.

Filter Installation

1. Insert lters in the bottom row.

2. Replace retaining angle and

insert screws (1).

3. Insert lters in the next level.

4. Replace retaining angle and

insert screw (1).

5-7. Repeat Steps 3 and 4.

8. Replace retaining angle and

insert screws (2).

9. Replace lter cabinet door and

secure all latches and screws.

Replacement Filters/Blockoff Plates - currently manufactured "BL" Cabinets

Blockoff

Plate

Sizes 400/800/1200

Sizes 700/1050

Sizes 500/600

Filter

* If replacing 1" lters, replace with locally

supplied lters in the size and type listed.

Quantities are listed above by size,

arrangements are illustrated right, and

instructions below apply to both 1" and 2"

lters.

A 16 x 16

B 16 x 25

C 12 x 20

D 12 x 25

A 16 x 25

B 12 x 20

C 12 x 30

A 16 x 16

B 16 x 25

C 12 x 25

D 12 x 32

A 16 x 20

B 16 x 25

C 12 x 20

D 12 x 25

A 16 x 25

B 12 x 20

C 12 x 32

A 16 x 16

B 16 x 25

C 12 x 16

D 12 x 26

A 16 x 20

B 16 x 25

C 12 x 20

D 12 x 26

A 16 x 25

B 12 x 26