User Manual

Features

Top Panel

1. Platter: Place your record here.

2. 45 RPM Adapter Holder:

Holds the included 45 RPM

adapter. When not using the

adapter, please place it in this

holder.

3. Tonearm: The fixed tonearm

can be raised and lowered by

hand, or by pressing the raise /

lower lever.

4. Arm Clip: This specially

designed arm clip secures the

tonearm while at rest or when

not in use. The arm clip has

been designed to remain in the

up position while unlocked.

5. Raise / Lower Lever: Raises

and lowers the tonearm.

6. 33 / 45 / 78 Switch: This switch controls the

speed of the turntable platter.

Note: For best results when playing 78 RPM

vinyl records, use a 78 stylus (sold separately).

Only use a 78 stylus with 78 RPM vinyl records.

7. Autostop switch: This switch turns autostop

on or off. When autostop is on, the platter will

start spinning when the tonearm is placed over

the record and stop spinning when the record

has reached the end. When Autostop is off, the platter will always spin regardless of the

position of the tonearm.

Note: If your vinyl record stops before it reaches the end of the music, turn Autostop to

the off position for this particular record. This is generally recommended for 45 RPM

records.

IMPORTANT: Remove the plastic

cartridge cover (needle cover) before

operating the turntable.

*WARNING: The RCA outputs are LINE

level. Please only connect these to LINE

level inputs. You may damage your

receiver if you plug in a LINE level device

into a PHONO level input.