Operating instructions

4 Neonatal Technical and Operating Instructions
3.0 Scale Setup
Figure 3-1. Neonatal Display
Use the following table to identify what each part of the display does.
Item Description Function
1 ON-OFF key
One short push for On
One short push for Off
This key turns the scale on and off
2 REWEIGH key
One short push
This key allows repeated reweighing of an
infant
3 ZERO key
When the scale is turned on, use one short
push
This zeros the digital display prior to
weighing. It enables the cancellation (tare) of
weight of blankets or other accessories on
the scale.
4 Kg/Lb key
One short push
This key selects either pounds/ounces or
kilograms
5 BAT indicator When the scale is on, this display indicates
that the scale battery requires recharging.
The scale should be connected to an AC
power source.
6 ZERO indicator When the scale is on, this display indicates
that the scale is stable and ready for use
7 6-Digit LCD Digital display The LCD displays the infant weight in
pounds/ounces or kilograms and shown by
the LB or KG indicator on the right side of
the display. When the REWEIGH key is
depressed, the display will blink until
the infant’s weight is determined.
8 CHARGE indicator This is displayed when the scale is on and is
connected to an AC power source and the
battery is in the charging process
9 LB indicator When the scale is on, this display indicates
that the scale is weighing in pounds/ounces
10 KG indicator When the scale is on, this display indicates
that the scale is weighing in kilograms
Table 3-1. Front Panel, Showing Annunciators