User Manual - Version 2.2 Manual

Counterpart User Manual - Installation 15
bracket, otherwise it will not fit.
Figure 2-12. Attach Bracket Assembly to Scale Base While Scale is Tipped on its Side.
3. Set scale base down on a flat surface positioning the bracket assembly at the edge of a table.
4. Attach the indicator to the bracket usin
g the second set of screws provided and screw white feet into
indicator base as shown below.
Figure 2-13. Shown - Indicator Attached to the Scale Base
Ensure the cable from
the underside of the scale is
run between bracket and
scale prior to attaching
Note