User Manual - Version 2.2 Manual

Counterpart User Manual - Configuration 19
3.0 Configuration
3.1 Front Panel Configuration
To set up and configure the Counterpart counting Scale, you will use the MENU key on the front panel. The
indicator is defaulted at the factory with the audit trail jumper (JMP1) in the ON position, allowing configuration
access by pressing the
Menu key. Pressing the MENU key will take you to the Audit menu selection. Use the
SAMPLE ( ) and PRINT ( ) navigation keys to move to other menu selections. Use the NET/GROSS ( ) and
ZERO ( ) navigation keys to enter and exit menu selections, respectively.
Figure 3-1. Menu Mode Navigation Structure
3.2 Menu Navigation
Once you have entered the menus, you can use the front panel buttons to navigate. Note the looped menu
structure shown in Figure 3-1. This provides a shortcut for accessing the right
most menu items by navigating to
the left, and vice-versa for the opposite side of the menu. T
his shortcut also holds true for sub-menu navigation.
Figure 3-2. Front Panel Key Functions in Menu Mode
Menu Function
ID ID Allows you to setup or edit IDs.
AUDIT Audit Trail Displays the legally relevant (LR) firmware v
ersion, configuration count, and calibration
count.
CALIBR Calibrate Calibrates the scale.
SETUP Setup Accesses setup options for the sca
le, features, serial output, print format, digital inputs
and outputs, and displays the version number.
TEST Test Performs a basic test on the A/D, digital inputs and ou
tputs, communication ports, RAM,
and keypad.
DISPLAY Display Accesses the setup option for co
ntrast, image, brightness
SETPTS Setpoints For setting up weighmode setpoint accessible parameters using numeric values
Table 3-1. Menu Summary
AUDIT CALIBR SETUP TEST DISPLAY ID
SETPTS
ZERO
B/N
GROSS
NET
TARE SAMPLE
Pieces
PRINT
UNIT
WEIGHT
MENU
SETUP
UNITS
TOGGLE
Move UP/
Increment
value
Move
DOWN/
Increment
Value
Enter Key
Move
LEFT/
previous
Enter
MORE/
Move
forward/