User Manual - Version 2.2 Manual

22 Counterpart User Manual
3.6 Setup Menu
The setup menu allows you to configure settings for the scale, features, serial port settings, Ethernet, print
format, and digital inputs and outputs. You can also view the software and regulatory versions, and revert to
default settings.
To access the second level parameters use the down arrow on the
indicator to access the submenus which are
noted in Table 3-4.
3.6.1 SCALE Submenu
Calibration can be performed in two places within the menu: the CALIBR menu shown in Figure 3-13 is an
in-depth scale setup and calibration. A “quic
k access” calibration is shown in Figure 4-1 on page 49.
Menu
Menu Function
SCALES Configuration Configure and calibrate scales.
FEATURE Feature Set date and time formats passwor
ds, keyboard locks, regulatory mode, and initial
consecutive number value, count function, and define softkeys.
SERIAL Serial Configures the communications ports
ETHERNET Ethernet Configures the Ethernet port
PFORMT Print Format Set print format used for header, gross, net, coun
t, pallet, setpoint and total ticket formats.
See Section 6.0 on page 63 for more information.
SETPTS Setpoints Configure setpoints.
DIG IO Digital IO Assign digital input/output functions
VERS Version Display installed software version number. The Re
set Config softkey on the Version menu can
be used to restore all configuration parameters to their default values.