User Manual - Version 2.2 Manual

44 Counterpart User Manual
Setpoints Weigh Mode Parameter Menu
Set up of setpoints is allowed while in the weigh mode.
While setting up setpoints, the Access parameter nee
ds to be set to either On or Off.
• Setting it to
On allows a setpoint to be viewed and edited if setpoint type is: Gross, Net, Piececnt, %Rel,
Delay or Counter.
• Setting it to
Off allows a setpoint to be viewed but not edited if the setpoint type is: Gross, Net, Piececnt,
%Rel, Delay, or Counter.
• Hide will not show the setpoint.
Figure 3-12. Setpoint Menu While in Weighmode
XXXXXXX
ID DISPLAYTESTSETUPAUDIT CALIBR
VALUE
BANDVAL
If TRIP=
INBAND or
OUTBAND
number
number
HYSTER
number
PRESTAB
PCOUNT
VALUE
PREVAL
number
PREADJ
number
FMT
Level 1
Level 2
SETPT 1 SETPT 2 - SETPT 6
SAME AS SETPT 1
GROSS
NET PIECECNT
DELAY
%REL
COUNTER
In Weigh Mode
If TRIP=
HIGHER or
LOWER
If PREACT=
ON or
LEARN
If PREACT
=
LEARN
number
SETPTS
VALUE
number