User Manual - Version 2.2 Manual

Counterpart User Manual - Print Formatting 73
The 500-character limit of each print format string includes the output field length of the print formatting commands,
not the command length. For example, if the indicator is configured to show a decimal point, the <G> command
generates an output field of 13 characters: the 10-character weight value (including decimal point), one space, and
a two-digit units identifier. The two header formats as limited to 100 characters each.
The default Counterpart print formats are shown in Table 7-2 and Table 7-3:
7.2 Customizing Print Formats
The following sections describe procedures for customizing the GFMT, NFMT and CFMT formats using the EDP
port, the front panel (
PFORMT menu), and the Revolution
®
configuration utility.
7.2.1 Using the EDP Port
With a personal computer, terminal, you can use the EDP command set to customize the print format strings.
To view the current setting of a format string, type t
he name of the string (GFMT.FMT or NFMT.FMT) and press TARE
(Enter)
. For example, to check the current configuration of the GFMT.FMT format, type GFMT.FMT and press ENTER.
The indicator responds by sending the current configuration for the gross format:
GFMT.FMT=<G> GROSS<NL>
To change the format, use the GFMT.FMT or NFMT EDP command followed by an equals sign (=) and the modified
print format string. For example, to add the name and address of a company to the gross format, you could send
the following EDP command:
Indicator must be placed in the config mode with CONFIG shown on the display.
GFMT.FMT=FINE TRANSFER CO<NL>32400 WEST HIGHW
AY ROAD<NL>SMALLTOWN<NL2><G> GROSS<NL>
A ticket printed using this format might look like the following:
FINE TRANSFER CO
32400 WEST HIGHWAY ROAD
SMALLTOWN
1345 lb GROSS
TOTAL
N<NL>A410,32,1,5,2,1,N,"<TOT
AL
QUANTITY>"<NL>A57,532,1,3,1,1,N,"<TD>"<NL>A309,39,1,5,2,1,N,"<TTLV>"<NL
>B195,32,1,3,2,4,101,N,"<TV>"<NL>
A61,32,1,5,1,1,N,"BOX COUNT: <TTLC>"<NL>P1<NL>
Totalization mode
SPFMT
N<NL>A274,53,1,2,3,3,N,”<IDD>”<NL>B421,55,1,3,1,2,96,B,”<IDC>”<NL>A96,49,
1,1,4,4,N,”QTY<SCVC>”<NL>P1<NL>
Setpoint mode
ACCFMT
N<NL>A410,32,1,5,2,1,N,"TOT
AL
QUANTITY"<NL>A57,532,1,3,1,1,N,"<TD>"<NL>A309,39,1,5,2,1,N,"<A>"<NL>B19
5,32,1,3,2,4,101,N,"<AC>"<NL>
A61,32,1,5,1,1,N,"ACCUMULATIONS: <AC>"<NL>P1<NL>
Accumulator enabled
and displayed
Format Default Format String Sample Output
H1 Company Name <NL> Street Address <NL> City
, ST ZIP <NL2> Company Name, Street Address, City, ST ZIP
H2 Company Name <NL> Street Address <NL> City
, ST ZIP <NL2> Company Name, Street Address, City, ST ZIP
Table 7-3. H1, H2 Formats
Format Default Format String Used When
Table 7-2. Default Print Formats
Note
Note