Owner's manual

6 Certificate Retrieval System User’s Guide
Figure 2-13. Update User
It may also become necessary to remove users when
they are no longer allowed access to the system. If you
are deleting a user,
1. Select the user and point and click the Edit
hyperlink.
2. Click the Delete button.
Figure 2-14. Delete User
2.2.7 Technicians
The CRS system needs to have technicians added to
the system so they will be downloaded to the PDA.
To add a technician,
1. Select Technicians under Admin on the
navigation bar.
2. Click the Add Technician button.
3. Enter contact information.
Select Active or Inactive for the Technician
Status.
4. When finished click the Save Technician
button.
Figure 2-15. Add a Technician Page
From this screen you can also edit existing
Technicians.
1. Select the technician and point and click the
Edit hyperlink.
Figure 2-16. Technician Information Page
2. Edit contact information.
3. When finished click the Update Technician
button
2.2.8 Final Accuracy
Information added on this page is noted on the
certificate. Final accuracy notes if the scale is within
the customers required accuracy. Default answers are:
Yes, No, or Calibration Results.
1. Select Final Accuracy under Admin on the
navigation bar.
2. Click the Add Final Accuracy button.
3. Enter final accuracy name.
4. When finished click the Save Final Accuracy
button.
Figure 2-17. Final Accuracy Information Page