Owner's manual

Certificate Retrieval System User’s Guide - CRS Administration 7
2.2.9 Final Environmental Conditions
This is section is used on the PDA for a selection of
available types of environmental conditions.
Figure 2-18. Final Environmental Condition Info Page
1. Select Final Env. Conditions under Admin
on the navigation bar.
2. Click the Add Final Env. Conditions button.
3. Enter final conditions name.
4. When finished click the Save Final Env.
Condition button.
2.2.10 Final Results
The final results page is used on the PDA for the
calibration result of the test. These results can be
customized to your business model or terms.
Figure 2-19. Final Results Information Page
To add other results,
1. Select Final Results under Admin on the
navigation bar.
2. Click the Add Final Result button.
3. Enter final results name as you want it to
display on PDA.
4. When finished click the Save Final Results
button.
2.2.11 Device Types
The device type information page has several different
device types:
• Balance
• Bench
•Floor
• Heavy Capacity
• Generic (with optional module)
Figure 2-20. Device Type Information Page
To add scale conditions,
1. Select Device Types under Admin on the
navigation bar.
1. Select the scale type and point and click the
Edit hyperlink.
2. Enter condition name.
3. When finished click the Add Condition
button.
Figure 2-21. Edit Device Type Page
Conditions you add for the different scale or device
types prompts the technician to note the condition of
the scale.
2.2.12 Locations (Optional - Multi Location Version)
CRS allows for multiple dealer locations so the scales
needing certification can be kept separate.
Figure 2-22. Dealer Location Information Page