Owner's manual

8 Certificate Retrieval System User’s Guide
1. Select Locations under Admin on the
navigation bar.
2. Click the Add Location button.
3. Enter location name.
4. When finished click the Save Location
button.
Figure 2-23. Add a Dealer Location Page
2.2.13 Forms
The form page is the calibration form that will be used
for CRS. The forms designs are setup by CRS but this
allows for specific data to be entered on the forms.
See section 8.0 on page 22 for examples.
1. Select Forms under Admin on the navigation
bar.
2. Click the Add Form button.
3. Complete fields.
4. When finished click the Save Form button
Figure 2-24. Add a Form Page
2.2.14 Configuration
This page provides various configuration options
relating to the CRS server and your CRS system.
1. Select Configuration under Admin on the
navigation bar.
2. Complete Configuration Page form
3. When finished click the Save Configuration
Settings button.
Figure 2-25. Configuration Page
2.2.15 Device Components
Device components need to be added to the system
prior to setting up customer scales.
Figure 2-26. Device Components Information Page
1. Select Device Components under Admin on
the navigation bar.
2. Click the Add Device Component button.
3. Select Manufacturer from drop down list.
4. Enter Model number.
5. When finished click the Save Component
button
Figure 2-27. Add a Scale Component Page