Specifications

D1100 Series Wireless Bed Scale Installation & Operation Manual — Troubleshooting 7
4.3.2 Beep Preference
The D1100 Series wireless bed scale system is designed with beep alerts.
The controller is defaulted to
Never.
Lost Pad Connection can also be selected and will alert the user if there is an error or obstruction preventing clear
communication with the scale pads.
Additional beep preference settings are available but because they are associated
with patient database information,
are only available in the D1100 Series service manual.
4.3.3 Date & Time
This option is for setting the current date and time. Use the following steps to set up date and time.
1. To enter the current year, use the up and down arrows to enter find the current y
ear and press the OK button.
2. To enter the current month, use the up and down arrows on the controller to find the curre
nt month and
press the
OK button.
3. To enter the current day, use the up and down arrows on the controller to find the current date and press
the
OK button.
4. To enter the current hour, use the up and down arrows on the controller until the correct hour appea
rs then
press
OK.
5. To enter the current minutes, use the up and down arrows on the controller until the correct minute appears,
then
press OK.
4.3.4 Deep Setting
This option is pass code protected for changing functionality in much more detail. Additional information on deep
settings are only available in the D1100 Series service manual.
5.0 Troubleshooting
Use the following troubleshooting tips if the unit isn’t working properly.
• When scale pads are not found by the controller or will not
turn on:
• Check batteries in each scale pad and the controller to ensure proper placement and connection.
• If
the weight readings are inconsistent, check the flooring on which the pads are plac
ed. The scale needs to
be used on level flooring, such as tile, cement, hardwood and clear of any debris.
• Make sure the mini ramps have been removed prior to
weighing.
• If you have followed these directions and are still not getting the desired results, call [phone] and
ask for technical support.